Konica Minolta manual Bizhub 750/600

12

Utility

	Parameter		Description	Settings (Default set-
				tings are underlined.)
	Finisher	Center	The stapling position when printing with	–12.8 to 12.7 mm:
	Adjust-	Staple	the “Fold & Staple” function can be ad-	0.0 mm
	ment	Position	justed in 0.1 mm increments.
			(FS-602)
		Half-Fold	The center folding position when printing	–12.8 to 12.7 mm:
		Position	with the “Fold & Staple” function can be	0.0 mm
			adjusted in 0.1 mm increments.
			(FS-602)
		Punch Ad-	Adjust the positions of the punched	Punch Vertical Position:
		justment	holes.	–5.0 to 5.0 mm: 0.0 mm
			• Punch Vertical Position: The vertical	Punch Horizontal Posi-
			position of the punched holes can be	tion: –5.0 to 5.0 mm:
			adjusted in 0.1 mm increments for	0.0 mm
			each paper size. (PK-505)	Punch Unit Vert. Posi-
			• Punch Horizontal Position: The hori-	tion: –5.0 to 5.0 mm:
			zontal position of the punched holes	0.0 mm
			can be adjusted in 0.1 mm incre-	Punch Unit Hor. Posi-
			ments. (PK-505)	tion: –5.0 to 5.0 mm: 0.0
			• Punch Unit Vert. Position: The vertical	mm
			position of the punched holes can be	Punch Regist Loop Size:
			adjusted in 0.1 mm increments for	Machine (Reverse Out-
			each paper size. (ZU-602)	put, ADU Output): –16.0
			• Punch Unit Hor. Position: The hori-	to 16.0 mm: 0.0 mm
			zontal position of the punched holes	PI (Uppre tray, Lower
			can be adjusted in 0.1 mm incre-	tray): –16.0 to 16.0 mm:
			ments. (ZU-602)	0.0 mm
			• Punch Resist Loop Size: The hole-
			punching shift for double-sided print-
			ing and outputting cover pages can
12
			be adjusted in 0.8 mm increments.
Chapter			(PK-505, ZU-602)
		Z-Fold Po-	The folding position for zigzag folding (Z-	1st Z-Folded Position:
		sition Ad-	Fold) can be adjusted for each paper	–12.8 to +12.7 mm:
		justment	size.	0.0 mm
			• 1st Z-Folded Position: The position of	2nd Z-Folded Position:
			the first fold can be adjusted in 0.1	–12.8 to +12.7 mm:
Utility			mm increments.	0.0 mm
			0.1 mm increments.
			• 2nd Z-Folded Position: The position
			of the second fold can be adjusted in
			(ZU-602 or PK-505+ZU-602)
		Tri-Fold	The folding positions when using the	–12.8 to +12.7 mm:
		Position	“Tri-Fold” setting can be adjusted in 0.1	0.0 mm
			mm increments.
			(FS-602 or PK-505+ZU-602)
		2 Position	The distance between the two staples	128 to 160 mm: 128 mm
		Staple	can be adjusted in 0.1 mm increments.
			• Staple
			• Corner Staple & Fold
			(FS-602)
		Cover	Adjust the cover sheet tray size if the pa-	—
		Sheet Tray	per cannot be detected correctly or if
		Size	one side of the cover sheet feeder is ad-
			justed.
			(PI-501)

12-30 bizhub 750/600