Konica Minolta 750 manual Initial Setting, Reminder

12

Utility

Initial Setting

Description		Settings (Default set-
		tings are underlined.)
Specify the default settings for Copy mode.		Current Setting/ Factory
The copy settings selected when the machine is turned on (the pow-		Default
er switch is set to “n”) or the [Reset] key is pressed can be specified.
•	Current Setting:
	The settings specified from the touch panel before Utility mode
	was entered are set as the default settings for Copy mode.
•	Factory Default:
	The factory default settings are set as the default settings for
	Copy mode.

Reminder

To change the default settings for Scan mode , press the [Scan] key, en- ter Utility mode, and then select a setting for this parameter.

!

Detail

For details on the default settings and the factory default settings, refer to “Automatically Canceling the Settings (Automatic Panel Reset)” on page 2-27.

Utility Chapter 12

12-20 bizhub 750/600