Konica Minolta 750 manual Loading Paper of a Different Size Into Paper Trays

Before Making Copies 2

2.8Loading Paper of a Different Size Into Paper Trays

The paper loaded into the tray 3 and 4 can be changed to that of a different size.

Note

To load paper of a different size into the tray 1 and 2 and the LCT (LU- 401/LU-402), contact your technical representative.

Changing the Size of Paper That Is Loaded

1Pull out the paper tray for the tray 3 or 4.

2Raise the paper take-up roller.

3Remove the trailing-edge guide, and then insert it at the position for the desired paper size.

Before Making Copies Chapter 2

–Press the button to remove the trailing- edge guide.

2

1

–Insert the trailing- edge guide into the hole correspond- ing to the size indi- cated on the bottom plate.

bizhub 750/600 2-51