Konica Minolta 750 manual When the Message ... Not enough remaining memo- ry. Appears

Troubleshooting

5

5.4When the Message “... Not enough remaining memo- ry.” Appears

This machine uses the memory to produce copies.

Since the amount of memory available is limited, the message “Scanning cannot be continued. Not enough remaining memory.” or “The job has been deleted. Not enough remaining memory.” appears if the memory becomes full while copying.

Continue the operation according to the corresponding instructions.

Memory Becomes Full While Scanning

This message appears when the memory becomes full and scanning stops while scanning in Copy mode.

To print all pages that have been scanned, touch [Print].

To delete the job for the scanned pages, touch [Delete].

Display in Enlarge Display Mode

Troubleshooting Chapter 5

bizhub 750/600 5-9