Konica Minolta 750 manual Installation and Operation Precautions, Disassemble and modification

Installation and Operation Precautions

Disassemble and modification

WARNING

•Do not attempt to remove the covers and pan- els which have been fixed to the product. Some products have a high-voltage part or a laser beam source inside that could cause an electri- cal shock or blindness.

•Do not modify this product, as a fire, electrical shock, or breakdown could result. If the prod- uct employs a laser, the laser beam source could cause blindness.

Power cord

WARNING

•Use only the power cord supplied in the pack- age. If a power cord is not supplied, only use the power cord and plug that is specified in POWER CORD INSTRUCTION. Failure to use this cord could result in a fire or electrical shock.

•Use the power cord supplied in the package only for this machine and NEVER use it for any other product. Failure to observe this precau- tion could result in a fire or electrical shock.

•Do not scratch, abrade, place a heavy object on, heat, twist, bend, pull on, or damage the power cord. Use of a damaged power cord (ex- posed core wire, broken wire, etc.) could result in a fire or breakdown.

Should any of these conditions be found, im- mediately turn OFF the power switch, unplug the power cord from the power outlet, and then call your authorized service representative.

1

Installation and Operation Precautions Chapter 1

bizhub 750/600 1-3