Konica Minolta 750 manual Main body

Before Making Copies

2

No.	Part Name	Description
1	Main body	The original is scanned by the scanner section, and
		the scanned image is printed by the printer section.
		Referred to as the “machine” or “main body”	2
		throughout the manual.
			Chapter
2	Shift tray SF-601	Separates copies fed out at an offset
3	Cover sheet feeder PI-501	Allows cover sheets to be inserted into copies if in-
		stalled onto finisher FS-504/FS-602, and allows the
		functions of installed finishers to be used manually
4	Punch kit PK-505	Allows hole punching to be used if installed onto fin-	Copies
		isher FS-504/FS-602
		Referred to as the “punch kit” throughout the man-
		ual.
			Making
5	Finisher FS-504	Feeds out printed pages. The “Sort”, “Group”, “Off-
		set” + “Sort”, “Offset” + “Group”, “Face Up” and
		Staple settings are available.
6	Finisher FS-602	Feeds out printed pages. The “Sort”, “Group”, “Off-	Before
		set” + “Sort”, “Offset” + “Group”, “Face Up”, Sta-
		ple, “Fold & Staple”, “Half Fold” and “Tri-Fold”
		settings are available.
7	Z-folding unit ZU-602	Allows holes to be punched for filing and allows
		pages to be folded in a zigzag if installed onto fin-
		isher FS-504/FS-602
8	Large capacity tray LU-402	Can be loaded with up to 4,000 sheets of paper
		(20lb)
		Referred to as the “LCT” throughout the manual.
9	Large capacity tray LU-401	Can be loaded with up to 4,000 sheets of paper
		(20lb)
		Referred to as the “LCT” throughout the manual.
10	Key counter	Controls the number of copies produced
11	Hard disk drive HD-503	Increases the number of original pages that can be
		stored and enables the “Set Numbering” and Box
		functions to be used
		Referred to as the “hard disk” or “HDD” throughout
		the manual.
12	Printer controller IC-202	Allows this machine to be used as a network printer
		(optional)
13	Local interface kit EK-701	Used for making a local connection between this
		machine and the computer

bizhub 750/600 2-7