Konica Minolta manual List/Counter, Standard Size Setting, Bizhub 750/600 12-31

Utility 12

Parameter		Description	Settings (Default set-
			tings are underlined.)
Scanner	Leading	The starting scanning position (document feed direction) of the doc-
Adjust-	Edge Ad-	ument can be adjusted. For details on making this adjustment, con-
ment	justment	tact your technical representative.
	Centering	The starting scanning position (transverse document feed direction)
		of the document can be adjusted. For details on making this adjust-
		ment, contact your technical representative.
	Vertical	If the copy image is distorted (stretched or compressed), the zoom
	Adjust-	ratio in the document feed direction for the scanner can be adjusted.
	ment	For details on making this adjustment, contact your technical repre-
		sentative.
ADF Centering		If the center position cannot be automatically adjusted in the trans-
		verse document feed direction, it can be adjusted manually. For de-
		tails on making this adjustment, contact your technical
		representative.

!

Detail

When PK-505 and ZU-602 are installed, adjustments can be made using both the “Punch Adjustment” and “Z-Fold Position Adjustment” param- eters. Contact your technical representative.

List/Counter

Parameter		Description
Management List	Job Settings List	The machine settings can be printed.
Paper Size/Type Counter		Store up to 9 combinations of paper sizes
		and paper types to be counted.
LCD Backlight Setting

Description		Settings (Default settings are underlined.)
Adjust the brightness of the touch panel back-		1 to 16: 8
light to one of 16 levels.
Standard Size Setting
Parameter	Description		Settings (Default
			settings are under-
			lined.)
Original Glass Original Size Detect	Specify the paper standards for		AB series/ Inch series/
	detecting paper from the original		A series/ Full size
	glass.
ADF Original Size Detect	Specify the paper standards for
	detecting paper in the ADF.

Utility Chapter 12

bizhub 750/600 12-31