Konica Minolta manual Daylight Saving Time Setting, Weekly Timer Setting, Bizhub 750/600 12-27

Utility

Note

12

[Print/Fax Output Setting] appears only if optional printer controller IC- 202 is installed.

The “Exit Tray Setting” parameter is available only if optional finisher FS- 504/FS-602 is installed.

Date/Time Setting

Description			Settings (Default set-
			tings are underlined.)
Specify the date, time and time zone for the machine’s internal clock.			Time Zone: -12:00 to
			13:00 00:00
Daylight Saving Time Setting
Description			Settings (Default set-
			tings are underlined.)
Select whether or not the machine’s internal clock observes daylight			ON/ OFF
saving time, and specify the daylight saving time.			Daylight Savings Time: 1
			to 150 minutes: 60 min-
			utes
Weekly Timer Setting
				12
				Chapter
Weekly Timer ON/OFF		Select whether or not the weekly timer is	ON/ OFF
Parameter		Description	Settings (Default set-
			tings are underlined.)
Setting		used.
Time Setting		Specify the time of each day that the ma-	–	Utility
Date Setting		Specify the individual dates or the days	–
		chine is turned on/off by the timer.
		of the week that the machine is turned
		on/off by the timer.
Select Time for Power		Specify the time that the machine is	ON/ OFF
Save		turned off/on when it has been turned on
		by the weekly timer.
Password for Non-Busi-	Select whether or not the machine can		ON/ OFF
ness Hours		be used after a password is entered
		when the machine has been turned off
		by the weekly timer.

bizhub 750/600 12-27