AllCalls displays the accumulated duration and call charge, if
available,of incoming and outgoing calls. The lock code or
PIN2is required to reset the timer and call charge.
CallWaiting allows you to receive a second call during your
currentcall. When updating or checking the status of call
waitingthe phone must be registered with a network.
Caller’sID allows you to check the status of Caller’s
Identification.The phone must be registered with a network.
UsingWithhold ID it is possible to check if you send Caller’s
Identificationinformation when you make a call. When checking
theStatus of Withhold ID the phone must be registered with a
network.
CallCharge will set the cost of each unit for call charge
informationand the required currency in which call charge is
displayed.
UsingMax Cost can restrict use of the phone to a specified
numberof units.
NOTE:The duration of one unit may vary during the day, peak and
off-peaktimes. Therefore, the call charge can be calculated
accordingly.However, call charge information may not give an
accuratereflection of the tariffs charged by your Service Provider.
Call DivertWhenCall Divert is enabled the divert icon (t) is displayed.
Youcan divert voice, fax and data calls using different
circumstancesand to different phone numbers.
Whenupdating or checking the Status of Call Divert the phone
mustbe registered with a network.
39
MenuStructures
Call Divert
Voice Calls
Fax Calls
Data Calls
Cancel All
Status
B