Before Requesting Service
ALL THESE THINGS ARE NORMAL:
The oven causes interference with my | Some radio and TV interference might occur when you cook with the |
TV. | microwave oven. This interference is similar to the interference caused by |
| small appliances such as mixers, vacuums, hair dryers, etc. It does not |
| indicate a problem with your oven. |
|
|
Steam accumulates on the oven door | During cooking, steam and warm air are given off from the food. Most of the |
and warm air comes from the oven | steam and warm air are removed from the oven by the air which circulates in |
vents. | the oven cavity. However, some steam will condense on cooler surfaces such |
| as the oven door. This is normal. |
|
|
I accidentally operate my microwave | Operating the oven empty for a short time will not damage the oven. |
oven without any food in it. | However, we do not recommend this to be done. |
|
|
There are humming and clicking | These noise occur as the oven automatically switches from microwave power |
noises from my oven when I cook by | to Grill, to create the Combination setting. This is normal. |
Combination. |
|
|
|
The oven has an odor and generates | It is essential that your oven is wiped out regularly particularly after cooking |
smoke when using Combination and | by Combination or Grill. Any fat and grease that builds up on the roof and |
Grill function. | walls of the oven will begin to smoke if not cleaned. |
English
PROBLEM | POSSIBLE CAUSE | REMEDY |
Oven will not turn on.
Oven will not start cooking.
"" appears in the display window.
The "" appears in the Display Window.
The oven stops cooking by microwave and "H00", "H97" or "H98" appears in the Display Window.
The oven is not plugged in securely.
Circuit breaker or fuse is tripped or blown.
There is a problem with the outlet.
The door is not closed completely.
Start Button was not pressed after programming.
Another program has already been entered into the oven.
The program has not been entered correctly.
Stop/Reset Button has been pressed accidentally.
The cavity is overheated.
The Child Safety Lock was activated by pressing Start Button 3 times.
This display indicates a problem with the microwave generation system.
Remove plug from outlet, wait 10 seconds and
Contact the specified service center.
Plug another appliance into the outlet to check if the outlet is working.
Close the oven door securely.
Press Start Button.
Press Stop/Reset Button to cancel the previous program and program again.
Program again according to the Operating Instructions.
Program oven again.
Operate again after it cools down.
Deactivate Lock by pressing Stop/ Reset Button 3 times.
Please contact the specified service center.
If it seems there is a problem with the oven, contact an authorized Service Centre.
-
IP4230_39X90KT_Eng_25_120726.indd 21