- 141 -
Playback/Editing
It is possible to setup the images to be uploaded to the image sharing sites (Facebook/
YouTube) on this unit.
You can only upload motion pictures to YouTube, while you may upload both motion pictures
and still pictures to Facebook.
This cannot be done to the images in the built-in memory. Copy the im ag es to a card
(P155), and then perform the [UPLOAD SET].
Select [UPLOAD SET] on the [PLAYBACK] Mode menu. (P48)
Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/
SET].
Upload to the image sharing sites
An upload tool built-in to the camera “LUMIX Image Uploader” is automatically copied to
the card when you setup [UPLOAD SET].
Perform the upload operation after connecting the camera to a PC (P165). For details,
refer to P168.
Canceling all the [UPLOAD SET] settings
1Select [UPLOAD SET] on the [PLAYBACK] Mode menu.
2Press 3/4 to select [CANCEL] and then press [MENU/SET].
Confirmation screen is displayed. It is executed when [YES] is selected.
Exit the menu after it is executed.
Note
The pictures that were taken with the [QUALITY] set to [ ] cannot be set to [UPLOAD SET].
Setting may not be possible for pictures recorded with other cameras.
It cannot be set with a card with less than 512MB of memory.
[UPLOAD SET]Select the picture, and then
press [MENU/SET] to set.
[MULTI] setting
Press [DISPLAY] to set (repeat), and
then press [MENU/SET] to set.
The setting is canceled when
[DISPLAY] is pressed again.
Confirmation screen is displayed. It is
executed when [YES] is selected.
Exit the menu after it is executed.
[SINGLE] [MULTI]
Press 2/1 to select
the picture. Press 3/4/2/1 to
select the pictures.