- 195 -
Others
•It is possible that the subject may be warped slightly, or the borders get colored, depending on
the zoom magnification, due to the characteristics of the lens. Also, the peripherals of the
image might look warped because the perspective is enhanced when the wide angle is used.
This is not a malfunction.
•This phenomenon appears when you press the shutte r but ton h alf way t o se t the a pert ur e valu e
and does not affect the recorded pictures.
•This phenomenon also appears when the brightness changes when the camera is zoomed or
when the camera is moved. This is because of operation of the automatic aperture of the
camera, and it is not a malfunction.
•The LCD monitor may flicker for a few seconds after the power is switched on. This is an
operation to correct flicker caused by lighting such as fluorescent lights, LED lights etc. and is
not a malfunction.
•Check [LCD MODE] setting. (P53)
•Perform [LCD Display]/[VIEWFINDER ]. (P52)
•Does the picture appear on the Viewfinder?
>Press [EVF/LCD] button to switch to LCD monitor display.
•This is not a malfunction.
These pixels do not affect the recorded pictures.
•In dark places, noise may appear to maintain the brightness of the LCD monitor. This does not
affect the pictures you are recording.
Lens
Recorded image may be warped, or nonexistent color is surrounding the
subject.
LCD monitor/Viewfinder
The LCD monitor/Viewfinder becomes darker or brighter for a moment.
The LCD monitor flickers indoors.
The LCD monitor/Viewfinder is too bright or dark.
The picture is not displayed on the LCD monitor.
Black, red, blue and green dots appear on the LCD monitor.
Noise appears on the LCD monitor.