- 111 -
Recording
Applicable modes:
Set the compression rate at which the pictures are to be stored.
¢1 If you delete a RAW file from the camera, the corresponding JPEG image will also be
deleted.
¢2 It is fixed to maximum recordable pixels for each image aspect rati o.
Note
•In [HIGH SENS.] and [FLASHBURST] in Scene Mode, this setting is fixed to [›].
•You can enjoy more advanced picture editing if you use RA W files. You can save RAW files in a
file format (JPEG, TIFF etc.) that c an be displa yed on you r PC etc., dev elop them a nd edit t hem
using the software “SILKYPIX Developer Studio” by Ichikawa Soft Laboratory on the CD-ROM
(supplied).
•[ ] images are recorded with a smaller data volume than [ ] or [ ].
•The following icons are displayed during the 3D recording.
•Refer to P80 for details.
[QUALITY]
[A]
JPEG
A JPEG image in which image quality was given priority.
[›]A standard image quality JPEG image.
This is useful for increasing the number of shots without changin g the
number of pixels.
[] RAWiJPEG You can record a RAW image and a JPEG image ([A] or [›])
simultaneously.¢1
[]
[]RAW You can only record RAW images.¢2
[]:MPOiFine (Both MPO images and fine JPEG images are recorded
simultaneously.)
[]:MPOiStandard (Both MPO images and standard JPEG images are recorded
simultaneously.)
[SENSITIVITY]