Others
- 190 -
[MEMORY CARD ERROR
FORMAT THIS CARD?]
It is a format that cannot be used with this unit.
>Insert a different card.
>Format the card again with the camera after saving necessary data on a PC etc. (P60)
The data on the card will be deleted.
[PLEASE TURN CAMERA OFF AND THEN ON AGAIN]/[SYSTEM ERROR]
This message will be displayed when the lens does not operate properly because force was
applied by hand, or if the lens hood is not attached securely.
>Turn the camera off and on. If the message persists, contact the dealer or your nearest
Service Center.
[MEMORY CARD PARAMETER ERROR]/[THIS MEMORY CARD CANNOT BE USED]
>Use a card compatible with this unit. (P20)
SD Memory Card (8 MB to 2 GB)
SDHC Memory Card (4 GB to 32 GB)
SDXC Memory Card (48 GB, 64 GB)
[INSERT SD CARD AGAIN]/[TRY ANOTHER CARD]
An error has occurred accessing the card.
>Insert the card again.
>Insert a different card.
[READ ERROR/WRITE ERROR
PLEASE CHECK THE CARD]
It has failed to read or write data.
>Remove the card after turning the power [OFF]. Insert the card again, turn the power on,
and try to read or write the data again.
The card may be broken.
>Insert a different card.
[MOTION RECORDING WAS CANCELLED DUE TO THE LIMITATION OF THE
WRITING SPEED OF THE CARD]
Use a card with SD Speed Class with “Class4” or higher when recording motion pictures.
In the event that it stops even after using a “Class4” card or higher, the data writing speed has
deteriorated so it is recommended to make a backup and then format (P60).
Depending on the type of the card, motion picture recording may stop in the middle.
[CANNOT RECORD DUE TO INCOMPATIBLE FORMAT(NTSC/PAL) DATA ON THIS
CARD.]
>If you want to delete some pictures, format the card after saving necessary data on a PC
etc. (P60)
>Insert a different card.