3-2. AGC detection control area setting (AGC CONT)
1.Set the ELC ON/OFF selector on the front panel of the camera control unit to the OFF position. Then confirm that the ELC parameter is OFF.
ON
OFF
ELC
2.Move the cursor to the ELC parameter and press the PAGE button.
The AGC CONT menu appears.
** AGC CONT **
AREAALL
PEAK/AVE P....I....A
RET END
3.Follow step 3 descrebed for
4.Follow steps 1 and 2 descrebed for
1.Move the cursor to the SHUTTER parameter.
2.Select the shutter speed or MANU for manual setting from the following.
*MANU 
OFF (1/60) 
1/100 
1/250
1/500 |
| 1/1000 |
| 1/2000 |
| 1/4000 |
| 1/10000 |
|
|
|
|
3.When you have selected MANU, press the PAGE but- ton. The SHUTTER menu appears and the MANU SET parameter starts blinking.
** SET UP **
CAMERA ID | *OFF | |
FLD/FRM | FLD | |
ELC | *OFF | |
SHUTTER | *MANU |
|
GAIN | AUTO | |
SYNC | INT | |
BLACK BAL | ABC | |
SCENE FILE | *SCENE1 | |
END |
|
|
** SHUTTER ** 
Blinking
MANU SET | 100 | /525 |
RET END
4.Select the desired electronic shutter speed by press- ing A or B. The adjustable range is
4.Electronic Shutter Speed Setting (SHUTTER)
Note: When ON is selected for ELC on the SETUP menu, this item is not available. To select the elec- tronic shutter speed, select OFF for ELC on the SETUP menu.
You can select the electronic shutter speed of 1/100, 1/250, 1/500, 1/1 000, 1/2 000, 1/4 000 or 1/10 000 sec- onds. The shutter speed can also be set manually.
** SET UP **
CAMERA ID | *OFF | ||
FLD/FRM |
| FLD | |
ELC | *OFF | ||
SHUTTER |
| OFF |
|
GAIN |
| AUTO | |
SYNC |
| INT | |
BLACK BAL |
| ABC | |
SCENE FILE | *SCENE1 | ||
END |
|
|
|
5. Gain Control Setting (GAIN)
You can set the gain (brightness level portion of an image) to automatic level adjustment (AUTO) or manu- al level adjustment (MANU).
** SET UP **
CAMERA ID | *OFF | ||
FLD/FRM |
| FLD | |
ELC | *OFF | ||
SHUTTER |
| OFF | |
GAIN |
| AUTO |
|
SYNC |
| INT | |
BLACK BAL |
| ABC | |
SCENE FILE | *SCENE1 | ||
END |
|
|
|
1.Move the cursor to the GAIN parameter.
2.Select AUTO or MANU. The gain of the video amplifier is changed according to the position of the automat- ic/manual gain selector (HIGH/LOW/OFF) on the front panel of the camera control unit.
16
