SETTING PROCEDURES
1.Camera Identification (CAMERA ID)
You can use the camera identification (CAMERA ID) to assign a name to the camera. The camera ID consists of up to 16 alphanumeric characters. You can select whether to have the camera ID displayed on the monitor screen or not.
** SET UP **
CAMERA ID | *OFF |
|
FLD/FRM | FLD | |
ELC | *OFF | |
SHUTTER | OFF | |
GAIN | AUTO | |
SYNC | INT | |
BLACK BAL | ABC | |
SCENE FILE | *SCENE1 | |
END |
|
|
To edit the CAMERA ID
1.Move the cursor to the CAMERA ID parameter.
2.Press the PAGE button. The CAMERA ID menu appears. The cursor on the letter “A” starts blinking.
To erase all characters in the editing area
Move the character cursor to RESET and press the PAGE button. All characters in the editing area disappear.
To determine the display position of the CAMERA ID
1.Move the cursor to POSI, and press the PAGE button. The display shown below appears and the CAMERA ID starts blinking.
Blinking
2. | Move the CAMERA ID to the desired position by press- |
| ing A, B or the ITEM button. |
3. | Press the PAGE button to fix the position of the CAM- |
| ERA ID. The mode returns to the previous CAMERA ID |
| menu. |
| Notes: |
Character Cursor
ABCDEFGHIJKLM NOPQRSTUVWXYZ 0123456789 ().,'":;&#!?=
← → SPACE
*POSI RET END RESET
Editing Cursor ................
Character
Area
Command
Editing
Area
• | The CAMERA ID stops at the edges of the monitor |
| screen. |
• | The CAMERA ID moves faster if any of A, B or |
| the ITEM button is kept pressed for a second or |
| longer. |
To return to the SETUP menu
Move the cursor to RET and press the PAGE button. The SETUP menu appears.
To display the CAMERA ID on the monitor screen
Move the cursor to CAMERA ID in the SETUP menu and select ON.
3.Move the character cursor to a character you want by pressing ITEM, A or B.
4.After selecting the character, press the PAGE button. The selected character appears in the editing area. (The editing cursor in the editing area moves to the right automatically at this moment.)
5.Repeat the steps above until all characters are edited.
To enter a blank space in the CAMERA ID
Move the character cursor to SPACE and press the PAGE button.
To edit a specific character in the CAMERA ID
1. Move the character cursor to ← or → then press the PAGE button to move the editing cursor to the charac- ter to be edited in the editing area.
2.Move the character cursor to the character area and select a new character.
3.Press the PAGE button to set the CAMERA ID.
2.Field/Frame Charging Mode Setting (FLD/FRM)
You can select the charging mode from FIELD or FRAME.
** SET UP **
CAMERA ID | *OFF | ||
FLD/FRM |
| FLD |
|
ELC | *OFF | ||
SHUTTER |
| OFF | |
GAIN |
| AUTO | |
SYNC |
| INT | |
BLACK BAL |
| ABC | |
SCENE FILE | *SCENE1 | ||
END |
|
|
|
13
