- 109 -
PlaybackProblem Check points
Scenes/still pictures
cannot be played back.
≥Any scenes/still pictures where the thumbnails are displayed
as cannot be played back.
≥Motion pictures recorded with other devices may not b e
possible to play back on this unit. ( is displayed.)
Scenes cannot be deleted. ≥Release the protect setting. (l68, 88)
≥Any scenes/still pictures where the thumbnails are displayed
as cannot be deleted. If the scenes/still pictures are
unnecessary, format the media to erase the data. (l38)
Please be aware that if a media is formatted then a ll the data
recorded on the media is erased and cannot be r ecovered.
Back up important data on a PC, disc etc.
With other productsProblem Check points
Although this unit is
correctly connected to a
TV, images cannot be
seen.
The images are squeezed
horizontally.
≥Please read the operating instructions of your TV and select
the channel that matches the input used for the connec tion.
≥Change the [TV ASPECT] setting to match the aspect ratio of
the TV. (l72)
≥When connecting the device to a television, the television
image will not be displayed in the following cases. Use the
device's LCD monitor.
jRecording video
jWhen setting PRE-REC
If the SD card is inserted in
another device, it is not
recognized.
≥Check that the device is compatible with the capacity or type
of SD card (SD Memory Card/SDHC Memory Card/SDXC
Memory Card) that you inserted. Refer to the operatin g
instructions of the device for details.
When connected by the
USB cable, this unit is not
detected by the other
devices.
≥When connected to other devices using only the battery,
reconnect using the AC adaptor.
VIERA Link does not work. (Setting on this unit)
≥Connect with a HDMI mini cable. (supplied or optional )*
(l71)
≥Set [VIERA Link] to [ON]. (l74)
≥Turn the unit off and then back on again.
* Use the HDMI mini cable that comes with this unit if supplied.
If it does not come with a HDMI mini cable, use a genu ine
Panasonic HDMI mini cable (RP-CDHM15, RP-CDHM30:
optional). Check the accessories in the basic owner’s manual.
(Setting on other devices)
≥If the TV input does not switch automatically, switch the input
using the TV remote control.
≥Check the VIERA Link setting on the connected dev ice.
≥Please refer to the operating instructions of the conne cted
device.