Panasonic HCV201K, HCX920K, HC-V210M, HC-V201, HCV110K 108, Environment TOO, DARK, or Lens Cover

	Indication
Problem	Check points
The remaining time	≥ [DISPLAY] of the [SETUP] is [OFF]. (l32)
indication or the elapsed
time indication is not
shown.
	Recording
Problem	Check points
The unit arbitrarily stops	≥ Use an SD card that can be used for motion picture recording.
recording.	(l16)

≥The recordable time may have shortened due to the deterioration of the data writing speed or repeated recording and deletion. Using the unit, format the SD card or built-in memory. (l38)

≥ / /

	If [AGS] is [ON], record in the normal horizontal position or set
	[AGS] to [OFF]. (l50)
Auto Focus function does	≥ Switch to Intelligent Auto Mode.
not work.	≥ If you are trying to record a scene that is hard to bring into
	focus in Auto Focus Mode, use the Manual Focus Mode to
	adjust the focus. (l27, 56)
“ENVIRONMENT TOO	≥ Before turning on the unit, open the lens cover.
DARK, OR LENS COVER	≥ This message may also be displayed when recording in a
CLOSED.” is displayed.	very dark location.
Color balance of images is ≥ In a place with multiple light sources, such as a gymnasium or
strange when recording in	a hall, set the White Balance setting to		(Indoor mode 2).
a place such as a	If you cannot record clearly with the		(Indoor mode 2), set
gymnasium.	it to	(Manual adjustment mode). (l54)
Color or brightness of the	≥ Color or brightness of the image may change, or you may see
image changes, or you	horizontal bars in the image when the object is recorded
may see horizontal bars in	under fluorescent light, mercury light or sodium light, etc., but
the image.	this is not a malfunction.

≥Record in Intelligent Auto Mode or set the shutter speed to

The LCD monitor flickers 1/60 in areas where the power supply frequency is 60 Hz, or

indoors. 1/100 in areas of 50 Hz.

- 108 -