- 77 -
3Following the screen display, select the desired item using the cursor button,

and press the ENTER button.

Select and press the ENTER button to return to the previ ous screen.
(When [SELECT SCENES] is selected)
When you press the ENTER button, the scene/still picture is selected and indication appears
on the thumbnail. Press the ENTER button again to ca ncel the operation.
(When [SELECT DATE] is selected)
When you press the ENTER button, a date is sel ected and surrounded by red. Press the ENTER
button again to cancel the operation.
Up to 99 scenes/still pictures or 99 dates can be set in succession.
If 2 or more SD cards are necessary to copy, change the card following the ins tructions on the
screen.
4Press the MENU button when the copy complete message is displayed.
The thumbnail view of the copy destination is indicated.

When you stop copying halfway

Press the MENU button while copying.
Depending on the following conditions, the time it takes for copying may be longer.
jThe number of recorded scenes is large.
jThe temperature of the unit is high.
If some motion pictures or still pictures have already been recorded to the copy destination, then
the same date may be assigned or images may not disp lay by date when the list by date is
selected.
Motion pictures that have been recorded on another device may not be copied. Data recorded on
a PC with HDWriter LE 2.0, etc. cannot be copied.
Protection setting will be cleared on the copied motion pictures and still pictures when copying
motion pictures and still pictures with protection setting.
The order in which the scenes or still pictures were copied cannot be changed.

Approximate time for copying

When copying a recorded motion picture of full 4 GB size:
Approx. 5 minutes to 15 minutes
To copy approx. 600 MB still pictures (Picture size ):
Approx. 5 minutes to 15 minutes
If you will delete the motion pictures or still pictures after copying is co mplete, be sure to
play back the motion pictures or still pic tures to check that they have been copi ed to
correctly before deleting.
10
M