Panasonic HDC-SD800P owner manual 140

	With a PC
Problem	Check points
When connected by the	≥ After re-inserting the SD card into the unit, reconnect the
USB cable, this unit is	supplied USB cable.
not detected by the PC.	≥ Select another USB terminal on the PC.
	≥ Check the operating environment. (l 121,130)
	≥ Connect the supplied USB cable again after restarting the
	PC and turning on this unit again.
When the USB cable is	≥ To disconnect the USB cable safely, double-click the
disconnected, an error	icon in the task tray and follow the instructions on the
message will appear on	screen.
the PC.
Cannot see the PDF	≥ You will need Adobe Acrobat Reader 5.0 or later or
operating instructions	Adobe Reader 7.0 or later to read the PDF operating
for HD Writer AE 3.0.	instructions for HD Writer AE 3.0.
Cannot import AVCHD	≥ You may not be able to import AVCHD scenes with
scenes with iMovie’11.	iMovie’11 when both AVCHD scenes and iFrame scenes
	are recorded on a single SD card. In such a case, first
	copy all the iFrame scenes data to iMovie’11, delete all
	the iFrame scenes data on the SD card, and then import
	the AVCHD scenes with iMovie’11.

	Others
Problem	Check points
Item other than the	≥ Calibrate the touch screen. (l 46)
touched one is selected.
If the SD card is inserted	≥ If the SD card is formatted on a PC, it may not be
in this unit, it is not	recognized by this unit. Use this unit to format SD cards.
recognized.	(l 45)
The remote control does	≥ [REMOTE CONTROL] of the [SETUP] is [OFF]. (l 47)
not function.	≥ The button-type battery of the remote control may have
	run out. Replace it with a new button-type battery. (l 47)

140

VQT3K35