Panasonic HDC-SD800P Smile shot, Built-in flash, To adjust the brightness of the flash

Smile shot

When a smiling face is detected during motion picture recording, the unit automatically records a still picture.

The icon changes each time it is touched.

([ON]) # ([FACE RECOG.]) # [OFF]

: The unit records a still picture on detecting a smiling face.

: Still pictures are only recorded when the face of a person registered using Face Recognition (l 63) is detected.

[OFF]: Cancel the setting.

≥During Smile Shot recording, the face detected as a smiling face is surrounded by a green

frame and / are red.

≥Smile Shot recording will not work in the following cases. ( / will flash) jWhen there is no SD card inserted

jWhen it is set to Manual Focus

jWhen the Interval recording is used

jWhen [FACE RECOG.] is set to [OFF], or no one is registered (In ([FACE RECOG.]) only)

≥Depending on the recording conditions (type of smile, camera shake, etc.), the face of the subject may not be detected correctly.

≥The number of recording pixels are 13.3M (4864k2736), 8.3M (3840k2160) or

2.1M (1920k1080). (l 71)

≥When still pictures that have been recorded using the Smile Shot are displayed as

thumbnails, the appears.

≥When the AF/AE tracking function is target locking a face of the subject, still pictures are only recorded if a smiling face is detected on the locked subject. When the Smile Shot

function is set to ([FACE RECOG.]), it will record only if the face of a subject registered with [FACE RECOG.] is locked as a target.

Built-in flash

When the button is pressed, the flash is activated and the picture will be recorded. Use the Built-in flash in order to record still pictures in dark places.

Each time the ß icon is selected, the indication changes by one setting in the following order:

ß([ON]) # ßA ([AUTO]) # ([OFF])

≥The unit automatically determines if the flash is necessary even when it has been set to

by detecting the ambient brightness. (If it determines that the flash is necessary, the

indication lights up in red.)

∫To adjust the brightness of the flash

MENU : [PICTURE] # [FLASH LEVEL] # desired setting [ßj]: Less bright

[ßd0]: Normal

[ßi]: Much brighter

≥The light from the flash may be blocked by the lens hood when the lens hood is attached.

≥Do not use the flash with the ND filter (optional) or the conversion lens (optional) attached.

≥If the ß indication etc. flashes when the button is pressed halfway, the flash is not activated.

57

VQT3K35