Panasonic HDC-SD800P MIC Level, Touch / to adjust, Menu Record Setup # Zoom MIC # on, Auto

[ZOOM MIC]

Directivity of the microphone is synchronized with the zoom operation. Sounds near the front of the unit are recorded more clearly if you zoom in (close-up) and surrounding sounds are recorded more realistically if you zoom out (wide angle).

≥Switch to Manual Mode. (l 75)

MENU : [RECORD SETUP] # [ZOOM MIC] # [ON]

[MIC LEVEL]

When recording, the input level from the built-in microphones can be adjusted.

≥Switch to Manual Mode. (l 75) 1 Select the menu.

MENU : [RECORD SETUP] # [MIC LEVEL] # desired setting

[AUTO]:		AGC is activated, and the recording level is adjusted
		automatically.
[SETr	]/[SET]:	The desired recording level can be set.

≥It is possible to select the setting from the quick menu in Manual Mode. (l 40) The microphone level returns to the setting adjusted previously, and it cannot be set from the quick menu.

2(When [SETr]/[SET] is selected)

Touch / to adjust.

≥Touch to activate/disactivate AGC.

When AGC is activated, the icon is surrounded by yellow and the amount of sound distortion can be reduced. When AGC is disactivated, natural recording can be performed.

≥Adjust the microphone input level so that the last

2 bars of the gain value are not red. (Otherwise, the sound is distorted.) Select a lower setting for microphone input level.

ALeft

B Right

C Microphone input level

3Touch [ENTER] to set the microphone input level and then touch [EXIT].

≥ (Microphone input level meter) appears on the screen.

≥When switching to Intelligent Auto Mode, the setting is fixed to [AUTO] and cannot be changed.

≥When [ZOOM MIC] is [ON], the volume will be different depending on the zoom rate.

≥The microphone input level meter shows the larger of the inputs from the 2 built-in microphones.

≥You cannot record with the audio completely muted.

68

VQT3K35