Panasonic HDC-SD800P owner manual Charging and recording time, Battery capacity indication

Charging and recording time

∫Charging/Recording time

≥Temperature: 25 oC (77 oF)/humidity: 60%RH

Battery model number	Charging	Recording	Maximum	Actual
[Voltage/Capacity			continuous	recordable
	time	mode
(minimum)]			recordable time	time
		[1080/60p]	1 h 35 min	1 h
Supplied battery/		[HA]	1 h 40 min
VW-VBN130 (optional)	2 h 30 min	[HG], [HX],	1 h 45 min
[7.2 V/1250 mAh]
		[HE]		1 h 5 min
		[iFrame]	1 h 50 min
		[1080/60p]	3 h 5 min	1 h 55 min
VW-VBN260 (optional)		[HA]		2 h
	4 h 30 min	[HG], [HX],	3 h 20 min
[7.2 V/2500 mAh]				2 h 5 min
		[HE]
		[iFrame]	3 h 30 min	2 h 10 min

≥These times are approximations.

≥The indicated charging time is for when the battery has been discharged completely. Charging time and recordable time vary depending on the usage conditions such as high/low temperature.

≥Recordable time of 3D recording mode is the same.

(During 3D recording mode, 1080/60p and iFrame recording mode cannot be used.)

≥The actual recordable time refers to the recordable time when repeatedly starting/stopping recording, turning the unit on/off, moving the zoom lever etc.

≥The batteries heat up after use or charging. This is not a malfunction.

Battery capacity indication

≥The display changes as the battery capacity reduces.

# # # #

If there is less than 3 minutes remaining, then will become red. If the battery

discharges, then will flash.

≥The remaining battery capacity is displayed when using the Panasonic battery that you can use for this unit. The actual time can vary depending on your actual use.

≥When using the AC adaptor or batteries made by other companies, the remaining battery capacity will not be shown.

21

VQT3K35