Panasonic HDC-SD800P owner manual To disconnect USB cable safely, 127

≥Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any other USB cables.)

≥When the unit is connected to a PC, it cannot be turned off. Disconnect the USB cable, before turning this unit off.

≥When performing reading/writing between a PC and an SD card, be aware that some SD card slots built into PCs and some SD card readers are not compatible with the SDHC Memory Card or SDXC Memory Card.

≥When using an SDXC Memory Card, check the following support site. http://panasonic.net/avc/sdcard/information/SDXC.html

About the screen indication of the unit

≥Do not disconnect the USB cable, the battery or the AC adaptor while the access lamp is on or card access icon ( ) appears on the unit screen.

≥If the screen does not change when the unit is operated while connected to a PC, disconnect the battery and/or AC adaptor, wait approximately 1 minute, reconnect the battery and/or AC adaptor, wait approximately 1 minute again, and then turn the unit back on. (Data may be destroyed when above operation is performed while accessing the SD card)

∫To disconnect USB cable safely

Select the icon in task tray displayed on the PC, and then click [Eject Panasonic Camcorder].

≥Depending on your PC’s settings, this icon may not be displayed.

127

VQT3K35