Panasonic HDC-SD800P owner manual Touch Recorder on the screen of this unit, 114

2 Touch [RECORDER] on the screen of this unit.

≥When you select an option other than [RECORDER], reconnect the USB cable.

≥When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen to turn the LCD monitor on.

3 Dubbing through operations on the Blu-ray disc recorder or high- definition (AVCHD) compatible DVD recorder.

About the screen indication of the unit

≥When the unit is accessing the SD card, card access icon ( ) appears on the unit screen or the access lamp is on.

≥Be careful not to disconnect the USB cable, AC adaptor or battery while the unit is accessing the media, as this may result in the loss of recorded content.

≥Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any other USB cables.)

≥For details on dubbing and playback methods, read the operating instructions of the Blu-ray disc recorder or DVD recorder.

≥When you connect the unit to a Blu-ray disc recorder, a dubbing operations screen may appear on the television connected to the Blu-ray disc recorder. In this case as well, perform the operations of steps 1 to 3.

≥You cannot change the mode of the unit or turn off the unit while it is connected to a Blu-ray disc recorder or DVD recorder. Disconnect the USB cable before performing either of these operations.

≥If the battery runs down during dubbing, a message will appear. Operate the Blu-ray disc recorder to cancel the dubbing.

114

VQT3K35