2. How to replace the 2nd Display Unit
(1)In case of 950SD010, disconnect VGA cable and speaker cable from I/O panel.
(2)Loosen the thumbscrew on the lower portion of the rear cover of the main block by hand, and remove the rear cover.
*The thumbscrew shall be loosened until the screw rotates without resistance.
(3)Disconnect the connector of the 2nd Display Unit from the connector of the main block.
(4)Prepare a new rear display.
(5)Follow the steps (3), (4) and (5) of “How to mount the 2nd Display Unit”.
11