1. Getting Started

■Precautions

[POS Workstation: JS-950 series]IMPORTANT

Install a socket outlet adjacent to the equipment so that it will be easily accessible.

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.

DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

1.Avoid Radio Frequency Interference

Do not place the POS Workstation near a television or radio receiver.

2.Avoid Stacking

Do not place heavy objects on the POS Workstation.

3.Keep Small Objects Away

Do not insert paper clips or other small objects into POS Workstation. There is the risk of heat, fire or explosion.

4.Keep Dry

There is the risk of heat, fire or explosion.

5.Do Not Disassemble the POS Workstation

Do not attempt to disassemble the POS Workstation. There is the risk of heat, fire or explosion.

6.Do Not Touch the Plug with Wet Hands. There is the risk of electric shock.

7.Be Certain to Plug Fully Into the Outlet. There is the risk of electric shock or fire.

8.When Unplugging, Make Sure to Hold the Body of the Plug.

If the power cord or outlet is damaged, there is a risk of electric shock, short circuit or fire.

9.Do Not Use a Damaged Power Cord or Plug. There is the risk of electric shock or fire.

10.Clean the Dust off the Plug, Periodically. There is the risk of heat or fire.

11.Do not use With Any Other Battery Please use the specified battery.

CAUTION: Risk of explosion if battery is replced by an incorrect type.

Dispose of used batteries according to the instructions and local requirements.

12.Do not Touch the Power-cord or Plug During a Storm.

There is the risk of electric shock or fire.

13.Do not use the POS Workstation outdoors.

This product assumes the indoor use. There is the risk of breakdown.

14.Do not put the POS Workstation on a slope or an unstable place.

This can cause damage to the unit or injury by falling.

Note:Do not open the Rear cover and Filter cover while the POS Workstation is operating.

3