(12) |
Rib
3. How to replace the ID module unit
(1)Remove Display Unit according to Display Unit Installation.
(2)Prepare an ID module unit to be used.
*The ID module unit is supplied with 2 pieces of peripheral screws, 2 pieces of screws, 1 piece of long cable cover, and 1 piece of short cable cover as accessories.
(3)Slide the USB cable cover toward you while pushing both sides of the USB cable cover at the hinge section of the display unit inward to remove the cover.
(4)Disconnect the connector of the ID module unit from the connector of the main unit, and detach the cable from the guide channel.
(5)Remove the 2 screws on the rear side of the display unit using a screwdriver.
After removal of the screws, the peripheral screws can be removed from the front side of the mounted ID module unit.
(6)Perform replacement in accordance with the procedure 1, “How to mount the ID module unit”.
14