Tighten the screw to clamp the cable and wiring the cable as shown in the fig. (10)-4.

(11)Slide USB cable cover as shown in the fig. (11)-1. In case of Dallas KEY reader, slide the USB cable cover with care to avoid the cable from the rib of the USB cable cover as shown in the fig. (11)-2.

(12)Put the supplied 2 peripheral screws in from the front side of the ID module unit and tighten the screws using a screwdriver from the rear side to secure it.

(13)Install Display Unit according to Display Unit Installation.

(1)

(3)

(4)

(5)

(6)

Use only

(7)

Dallas KEY reader

 

 

 

(8)

(9)-1

(9)-2

Hinge cover side (salient)

(9)-3

(9)-4

(10)-1

(10)-2

(10)-3

(10)-4

13