Operation

Mixed Batch Card Guide

No adjustment to the document guide is required when using the mixed batch card guide. The mixed batch card guide prevents a card from skewing when scanning paper documents and a card simultaneously. The mixed batch card guide is attached to the scanner during shipping. If you remove the mixed batch card guide, keep it in a safe place.

Installing the mixed batch card guide

Install the mixed batch card guide as shown in the following illustration.

Using the mixed batch card guide

Set paper documents on the feed tray, and a card on the mixed batch card guide respectively.

The card set on the mixed batch card guide is fed after completing the paper document scanning.

The mixed batch card guide is suitable for the following card.

ISO format card:

 

Size:

85.6 x 54 mm (3.4 x 2.1 in.)

Thickness:

0.76 mm (0.03 in.)

Embossed card is also available.

Set the card horizontally.

Note

When using the mixed batch card guide, the document guides cannot be adjusted to less than A5 size.

Up to 3 cards can be set on the mixed batch card guide.

Make sure that the total height of the paper on the feed tray does not exceed 2 mm (0.08 in.). This is equivalent to about 20 sheets at 80 g/m² or 20 lb.

Operating Manual

37

Page 37
Image 37
Panasonic KC-S1026C manual Mixed Batch Card Guide, Installing the mixed batch card guide, Using the mixed batch card guide