10 | Operating Instructions
De-Registration
In order to perform de-registration, the repeater must have already been registered
to a base unit or cell station.
•Ensure that the repeater is switched off
(disconnect the AC adaptor) (both LEDs
are OFF).
•While holding down the repeater switch,
power on the repeater by connecting
the AC adaptor. Continue to hold down
the repeater switch for 10 seconds. The
red LED will flash slowly.
•After 10 seconds the red LED will go
steady ON. The Repeater is now de-
registered successfully.
•To re-register the repeater, please follow the normal registration process.
QUQX00130YA_01_A 20/1/04 6:40 pm Page 10