Panasonic KX-A272 operating instructions Verification Tone

Verification Tone

Repeater coverage can be checked by using the in-built verification tone. The coverage area of the repeater can be checked - if the ‘beep’ is no longer heard, then the handset is no longer in range of the repeater.

•Ensure the repeater is powered ON, and the green LED is steady ON.

•To activate a verification tone, press and hold the switch for one second. The green LED and the red LED will flash alternately, with the red LED synchronised with the verification tone sounding on the handset.

•To return the repeater to normal mode and disable the verification tone, press the repeater switch a second time. The green LED will go steady ON, and the red LED will go OFF.

NB: The verification tone can also be cancelled by powering off the repeater.

Operating Instructions 11