6| Operating Instructions
Placement
To get the best performance from the repeater:
•Select a raised position (on wall etc), which is well within range of the Base
Unit/Cell Station.
•Avoid positioning the repeater close to objects that will interfere with reception, such
as thick walls, radiators, metal shelving etc.
•For maximum distance noise-free operation, place your DECT repeater away from
electrical appliances such as TV, radio, personal computer or other telephone
equipment.
•Keep a minimum distance of 10m between repeaters.
•If the Green LED flashes - move the repeater closer to the Base Unit/Cell Station or
away from obstructions etc.
LED Status

Red LED (Indicates special states)

Green LED (Indicates registration / communications states)

On/off/blink specification Definition
On Repeater is not assigned to any system
Off Normal Operation
Slow blinking - “320ms on / 320ms off” Manual registration mode
Intermittent blinking “100ms on / 2.4sec off” Verification mode (Flashes in time with monitor beep
tone)
On/off/blink specification Definition
On Repeater successfully registered
Off Repeater de-powered
Slow blinking - “320ms on / 320ms off” Registration process ‘searching’ for Cell Station /
unregistered
Fast blinking - “200ms on / 200ms off” Repeater ID programming mode / Site Survey mode
(PBX application only)
QUQX00130YA_01_A 20/1/04 6:40 pm Page 6