Manual Registration
There must be at least one handset already registered to the base unit or cell station to carry out manual registration.
•Ensure that the repeater is switched off (disconnect the AC adaptor) (both LEDs are OFF).
•Power on the repeater, by connecting the AC adaptor. The red LED will light for 2 seconds, and then the green LED will flash slowly.
•Hold down the repeater switch for 3 seconds. The green LED and the red LED will flash alternately.
•Place your DECT base unit into registration mode by pressing and holding the Ï button for 10 seconds. This step is not necessary for registration to PBX cell stations.
•When the repeater has found a suitable cell station or base unit, the green LED will flash quickly.
•Please note :1) We recommend that you power down any cell station that you do not wish to connect to the Repeater prior to Registration.
8 Operating Instructions
