Wall Mounting
This unit can be mounted on a suitable wall or placed on a flat surface.
•Insert screws into wall. Avoid pipes and electrical cables etc. that may be present/buried. The centre of the screws must be 71mm apart. Allow a protrusion of 2mm from the base of the screw head to the wall, using the washer provided (see diagram below).
•Arrange the AC cord as shown, then mount the unit (4 possible routes available).
71mm
DC Jack
LED
Switch
Cord from AC adaptor
Screw
Head
Washer
Wall
Connection
•Plug in the AC adaptor to the rear of the unit, and fasten the AC cord to prevent it from being disconnected.
•The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use).
Operating Instructions 5
