Navigator Directory
42
To correct a mistake
1. Press {<} or {>} to move the cursor to the
incorrect character.
2. Press {CLEAR}.
3. Enter the correct character.

Using the base unit

1Press {MENU} repeatedly until the
following is displayed.
DIRECTORY SET
NAVI.=@ BROAD=#
2Press {*}.
NAME=
STORE:PRESS SET
3Enter the name, up to 10 characters (see
page 33 for instructions).
Example: NAME=ALICE
STORE:PRESS SET
LPressing the {#} key will change to
capital or lower-case alternatively.
4Press {SET}.
NO.=
5Enter the telephone number, up to 30 digits,
using the dial keypad.
Example: NO.=5552233
LIf you want to enter a hyphen, press
{FLASH/CALL WAIT}.
6Press {SET}.
REGISTERED

u

NAME=
STORE:PRESS SET
LTo program other entries, repeat steps 3
to 6.
7Press {MENU} to exit the program.
Helpful hint:
LYou can confirm the stored entries in the
telephone number list (page111).
Note:
LWhen the following is displayed in step 6, you
can store only 5 more entries.
REGISTERED
SPACE= 5 DIRS.
LIf there is no space to store new entries, the
following is displayed in step 6. Erase
unnecessary entries (page 45).
REGISTERED
DIRECTORY FULL
LA hyphen or a space entered in a telephone
number counts as two digits.
To correct a mistake
Press {<} or {>} to move the cursor to the
incorrect character/number, and then make the
correction.
To delete a character/number
Press {<} or {>} to move the cursor to the
character/number you want to delete, and press
{STOP}.
LIf {STOP} is pressed before pressing {<} or
{>}, all characters/numbers will be deleted.
{SET}{MENU}
{STOP}
(Delete)
{FLASH/CALL WAIT}
(Hyphen) {<}{>}