Features Summary
92
Code #76: Setting the connecting tone
CONNECTING TONE
MODE=ON [±]
If you often have trouble when sending a fax, this
feature allows you to hear connecting tones; fax
tone, ring back tone and busy tone. You can
confirm the status of the other partys machine.
LIf the ring back tone continues, the other
partys machine may not be a facsimile or
may have run out of paper. Check with the
other party.
LThe connecting tone volume cannot be
adjusted.
ON (default): You will hear connecting tones.
OFF: Deactivates this feature.
Code #77: Changing the receiving mode in
the auto answer setting
AUTO ANSWER
MODE=TAD/FAX [±]
TAD/FAX (default): Telephone Answering
Device/Facsimile mode (page64)
FAX ON LY: Facsimile only mode (page 64)
Code #80: Resetting advanced features to
their default settings
SET DEFAULT
RESET=NO [±]
To reset the advanced features:
1. Press {MENU}.
2. Press {#}, then {8}{0}.
3. Press {+} or {-} to select YES”.
4. Press {SET}.
5. Press {SET} again.
6. Press {MENU}.
See page 87 for the programming method.