Panasonic KX-FT21RS manual Service Function Table, 3ALL

KX-FT21RS

2.4.4.SERVICE FUNCTION TABLE

Code	Function	Set Value	Effective Range	Default	Remarks
501	Setting the pause time	001~600 × 100 msec	001~600	05000 msec	Selects the pause time in 100 msec steps.
502	Setting the flash recall time	01~99 × 10 msec	01~99	700 msec	Selects the line break time during flashing in
					10 msec steps.
503	Setting the pulse dial	1:10pps 2:20pps	1, 2	10 pps	Sets the pulse dial speed.
	speed
520	Setting the CED frequency	1:2100Hz 2:1100Hz	1, 2	2100 Hz	When international communications cannot be
					performed smoothly, select 1100 Hz.
521	Setting the international	1:ON 2:OFF	1, 2	ON	Selects the international line mode during FAX
	line mode				communication.
522	Setting the return to default	1:ON 2:OFF	1, 2	ON	Sets the resolution and contrast conditions for
	mode				FAX or copy to the default settings.
523	Setting the reception	1:ON 2:OFF	1, 2	OFF	When the telephone station is far from the
	equalizer				unit or sending cannot be performed correctly,
					set to "ON".
524	Setting the sending	1:ON 2:OFF	1, 2	OFF	When the telephone station is far from the
	equalizer				unit or sending cannot be performed correctly,
					set to "ON".
544	Selecting the document	01~99 step	00~99	-----	When the ADF function is incorrect, adjust the
	feed position				feed position. (8 step = 1mm)
550	Memory clear				Press "START/COPY/SET".
551	ROM version and sum check				Press "START/COPY/SET".
553	Setting the FAX monitor	1:OFF	1, 2, 3	OFF	Sets whether to monitor the line signal with
	function	2:PHASE B			the unit´s speaker during FAX communication
		3:ALL			or not.
554	Modem test				Press "START".
555	Scanner test				Press "START".
556	Motor test				Press "START".
557	LED test				Press "START".
558	LCD test				Press "START".
559	Setting the document jam	1:ON 2:OFF	1, 2	ON	See 2.2. USER RECOVERABLE ERRORS.
	detection
561	KEY test				Press any key.
563	CCD position adjustment	01~30 × 1 mm	00~30	-----	Lets you select the correction value for the
	value set				scanner to align the image.
570	Setting the % break	1:61% 2:67%	1, 2	61%	Sets the % break of pulse dialing.
571	Setting the number of	00~99	00~99	14 times	Selects the number of times that ITS is
	times that ITS is redialed				redialed (not including the first dial).
572	Setting the ITS redial	001~999 sec	001~999	030 sec	Sets the interval of ITS redialing.
	interval
573	Setting of number of time	01~99	01~99	15 times	Sets the number of times that the unit starts
	that REMOTE TURN ON				to receive a document in the TEL mode.
	BELL sound
590	Setting the number of FAX	00~99	00~99	5 times	Selects the number of redial times during FAX
	redial times				communication (not including the first dial).
591	Setting the FAX redial	001~999 sec	001~999	045 sec	Sets the FAX redial interval during FAX
	interval				communication.
592	Designation of CNG	1:OFF	1, 2, 3	ALL	Lets you select the CNG output during FAX
	sending	2:ALL			transmission.
		3:AUTO			ALL: CNG is output at phase A.
					AUTO: CNG is output only when
					automatic dialing is
					performed.
					OFF: CNG is not output at phase A.
593	Setting the interval	1:75 msec	1, 2, 3	75 msec	Sets the interval between the CED signal and
	between CED and the 300	2:500 msec			subsequent 300 bps signal.
	bps signal	3:1000 msec
594	Setting the overseas DIS	1: Detects on the 1st	1, 2	Detects on	Sets the recognition format of the DIS signal.
	detection	time.		the1st time.	1:Detects the first DIS signal sent from the
		2: Detects on the 2nd			receiver during FAX transmission.
		time.			2:Ignores the first DIS signal sent from the
					receiver during FAX transmission.
595	Setting an acceptable	001~999 × number of	001~999	100	Sets the number of acceptable error lines
	reception error value	times			when the FAX reconstructs the received data.
596	Setting the transmit level	- 15~00	- 15~00	- 10 dBm	Selects the FAX transmission level. (Increase
					the level when the telephone line condition is
					poor.)
598	Modem sensitivity		20~48	45	See 2.3.4.2.1. Defective facsimile section.
717	Transmit speed select	1:9600BPS	1~4	9600 BPS	Adjusts the speed to start training during FAX
		2:7200BPS			transmission.
		3:4800BPS
		4:2400BPS

76