10.2 Status of the unit

10.2.1 Using Remote Control

You can easily operate the following functions from your
computer.
– Programming the features (page 60)
KX-MB2025/KX-MB2030 only:
– Storing, editing or erasing items in directories
(page 44)
– Storing or erasing items for broadcast transmission
(page 46)
– Viewing items in the journal report (page 43)
– Saving the journal report on your computer
– Viewing items in the Caller ID list (page 56)
– Storing caller information into directories (page 57)
– Saving the Caller ID list on your computer
1Start Multi-Function Station. A [Remote Control]
RThe [Multi-Function Remote Control] window
will appear.
* The pictured model is KX-MB2025/KX-MB2030.
2Select the desired tab (KX-MB2025/KX-MB2030
only).
RThe latest data in the unit will be displayed.
3Perform the desired operation.
RFor details about each function, click [Help].
RTo stop the operation, click [Cancel].
4[OK]
RYou can also click [Apply] to continue the next
operation without closing the window.
5Enter the password (feature #155 on page 61). A
[OK]
RThe new data will be transferred to the unit and
the window will close.
Note:
RSome of the features cannot be programmed from
your computer.
RFor details, see the help file by selecting [] from
Multi-Function Station.
RWhen another person is adjusting stored data in the
unit, it may be overwritten. Make sure the unit is not
currently being used for the same function.

10.2.2 Using Device Monitor

You can confirm the setting information and current
status of the unit from your computer.
1Start Multi-Function Station.
2[Utilities] A [Device Monitor]
RThe [Device Monitor] window will appear.
3Confirm the status of the unit.
[Status]: Current status of the unit
Note:
RAdditional information (toner and recording paper
status, unit information, etc.) will be displayed in
[Status] tab by clicking [Advanced Information].
RYou can update the status of the unit by clicking
[Refresh].
RIf a printing error occurs, the Device Monitor will start
automatically and display the error information.
RFor details, see the help file by selecting [] from
Multi-Function Station.

10.2.3 Using the web browser (KX-MB2010/

KX-MB2030, LAN connection only)
You can confirm the setting information and status of the
unit from the web browser.
1Start Multi-Function Station. A [Utilities] A
[Configuration Web Page]
RYou can also access the unit by entering its IP
address in a web browser.
2Select a category from the menu bar.
[Status]: Toner and paper information, etc.
[Device]: Current status of the unit, etc.
[Network]: Network information, etc.
RWhen you select [Device] or [Network], you can
change which features are displayed by clicking
the feature tabs at the top of the right frame.
3Confirm the status of the unit.
Note:
RYou can update the status of the unit by clicking
[Reload].
78
10. Useful Information