9.2 Basic features
Feature/Code Selection
Setting the date and time
MBNM1NM0NM1N
Enter the date and time using the dial keypad. See page 23 for details.
Setting your logo
MBNM1NM0NM2N
(KX-MB2025/KX-MB2030
only)
Enter your logo using the dial keypad. See page 24 for details.
Setting your fax number
MBNM1NM0NM3N
(KX-MB2025/KX-MB2030
only)
Enter your fax number using the dial keypad. See page 25 for details.
Selecting the location where
you use
MBNM1NM1NM4N
(KX-MB2025CX/
KX-MB2030CX only)
This setting must match your location.
M1N “MIDDLE EAST” (default): To use in Middle East.
M2N “MALAYSIA”: To use in Malaysia.
M3N “ASIA”: To use in Asia.
M4N “TUNISIA”: To use in Tunisia.
M5N “AFRICA”: To use in Africa.
Setting the dialling mode
MBNM1NM2NM0N
(KX-MB2025/KX-MB2030
only)
M1N “PULSE”
M2N “TONE” (default)
See page 20 for details.
Setting recall/flash time
MBNM1NM2NM1N
(KX-MB2025/KX-MB2030
only)
The recall/flash time depends on your telephone exchange or host PBX.
M0N “900ms”
M1N “700ms” (default)
M2N “600ms”
M3N “400ms”
M4N “300ms”
M5N “250ms”
M6N “200ms”
M7N “160ms”
M8N “110ms”
M9N “100ms”
MGN “90ms”
MBN “80ms”
Note:
RIf the unit is connected via a PBX, PBX functions (transferring a call, etc.)
might not work correctly. Consult your PBX supplier for the correct setting.
Changing the LCD display
contrast
MBNM1NM4NM5N
M1N “NORMAL” (default)
M2N “DARKER”
Selecting the scale
MBNM1NM4NM7N
M1N “MILLIMETRES” (default)
M2N “INCHES”
Note:
RThe selected scale will be used when measurements are shown on the
unit’s display.
60
9. Programmable Features