2. Preparation
20 For assistance, please visit http://www.panasonic.com/help
Initial Programming
2.8 Date and time
We recommend you to set the date and time. The other
party will receive your unit’s date and time as the header
information.
* The pictured model is KX-MB3020.
1{Menu} i {#}{1}{0}{1} i {Set}
M:|01/D:01/Y:09
TIME: 12:00AM
2Enter the current month/date/year/hour/minute by
selecting 2 digits for each.
Example: August 10, 2009 10:15 PM (12 hour
clock format)
1. Press {0}{8} {1}{0} {0}{9} {1}{0} {1}{5}.
M:|08/D:10/Y:09
TIME: 10:15AM
2. Press {*} repeatedly to select “PM”.
3{Set}
4Press {Menu} to exit.
Note:
LTo check the current date and time setting, press
{Fax} to temporarily change the unit to the fax mode
(KX-MB3020 only).
LYour unit’s date and time will be used as the header
information for the following:
– When sending as an attached file to email
destination directly from this unit (Scan to email
address) (page 31).
– When sending faxes (page 41) (KX-MB3020
only).
LIf the date and time is not set correctly, the other
party will receive an incorrect date and time as their
header. This may confuse the other party.
To correct a mistake
Press {<} or {>} to move the cursor to the incorrect
number, and make the correction.
If you have subscribed to a Caller ID service (KX-
MB3020 only)
The date and time will be automatically set according to
the received caller information.
LIf the time has not previously been set, Caller ID will
not adjust the clock.
LYou can turn this feature OFF (feature #226 on page
56).
{Set}
{Menu}

{<}{>}{Fax}