Important Information
Do not position the unit in a location where it is unstable or subject to vibrations.
Laser radiation
CLASS 1 LASER PRODUCT
The printer of this unit utilises a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
See the operating instructions for the Laser diodes properties.
Fuser unit
During or immediately after printing, the fuser unit gets hot. This is normal. Do not touch the fuser unit.
Note:
LThe area near the recording paper exit also gets warm. This is normal.
Toner cartridge
Be careful of the following when you handle the toner cartridge:
If you ingest any toner, drink several glasses of water to dilute your stomach contents, and seek immediate medical treatment.
If any toner comes into contact with your eyes, flush them thoroughly with water, and seek medical treatment.
If any toner comes into contact with your skin or clothing, wash the area thoroughly with cold water, then air dry. Do not use hot water or hair dryer. If there is skin irritation, seek immediate medical treatment.
If you inhale any toner, move to an area with fresh air and consult local medical personnel.
USB cable
Use only shielded USB cable (Example: Hi- Speed USB 2.0 certified cable).
Important safety instructions
When using this unit, basic safety precautions should always be followed to reduce the risk of fire, electric shock, or personal injury.
1.Do not use this unit near water, for example near a bathtub, wash bowl, kitchen sink, etc.
2.For users other than Australia:
During thunderstorms, avoid using telephones except cordless types. There may be a remote risk of an electric shock from lightning.
For Australian users:
During thunderstorms, avoid using telephones including cordless phones. There is a risk of an electric shock from lightning.
3.Do not use this unit to report a gas leak, when in the vicinity of the leak.
SAVE THESE INSTRUCTIONS
Detailed operating instructions are on the | 7 |
