Preparation
17
7
Press OK .
8
Enter the current month and day by
using a 4-digit number.
(Ex. To set Dec. 27, enter “1227”.)
9
Press OK .
10
Enter the current year by using a 4-digit
number.
(Ex. To set the year 2001, enter “2001”.)
11
Press OK .
•A beep sounds.
•The clock starts working.
•To return to the standby mode, press
(EXIT).
09:30PM 01/01
2000
ENTER MONTH/DATE09:30PM 12/27
2000
ENTER MONTH/DATE09:30PM 12/27
2000
ENTER YEAR09:30PM 12/27
2001ENTER YEAR9:30PM 12/27
SET CLOCK ?
•You can go back to the previous display by pressing , when setting
the time and date.
•If 6 beeps sound when entering the time and date, a wrong number was
entered. Enter the correct time and date.
For Caller ID service users (p. 26)
•The Caller ID information will re-set the clock after the first ring if the
adjusted time and/or date is incorrect. However, if the time has not
previously been set, the Caller ID information will not adjust the clock.
•The Caller ID information will automatically adjust the clock for daylight
saving time.
If a power failure occurs or the AC adapter is disconnected from the base
unit for more than about 30 minutes, the time and date will be shown as
“12:00AM 1/1” or “0:00 1/1”. Readjust the date/time.