41
Basic Operation
•If a pause is required for dialling, (REDIAL/PAUSE) can be stored in a
phone number counting as one digit (p. 62) in step 5.
•You can exit the programming mode any time by pressing (EXIT/CH).
•If the display shows “Memory is full” in step 2, the display will return
to step 1. Press (EXIT/CH), and erase other stored items from the
directory (p. 47).
1
Press (FUNCTION/EDIT) on the portable unit.
2
While the arrow points to “Save
directory”, press OK (Yes key).
•The display shows the number of stored
items in the directory.
3
Enter a name, up to 15 characters, with the
dialling buttons, (*) (←) or (#) (→).
•See the steps for entering names and
symbols (p. 42).
•If a name is not required, press OK
(Next key) and go to step 5.
4
Press OK (Next key).
5
Enter a phone number up to 22 digits.
•Each time you press the digit to the
left of the cursor is erased.
6
Press OK (Save key).
•A beep sounds.
•The display will return to step 1. You can
continue storing other items after pressing
OK (Yes key).
•To return to the standby mode, press
(EXIT/CH).
0987654321
H
OK=Save
Enter name
Tom Jones
#=
←→
H
OK=Next
Enter name
#=
←→
H
OK=Next
Directory=
0 item
Enter phone no.
Tom Jones
0987654321
H
Save directory
Ringer volume
GF
H
OK=Yes