Displays8
Base unit display
In the standby mode, the display
shows the current time and date,
and the number of new calls.
The base unit ringer volume is off.
To turn the ringer on, see page
15.
The alarm clock is turned on. To
cancel the mode, see page 54.
The Caller List is empty.
This is a display from the Caller
List.
The display shows:
— the time and date of the last call
(Ex. Nov. 24, 11:50 AM),
— the number of the call in the
Caller List (Ex. #41),
— the caller information is new
and has not been viewed
(“NEW” is displayed),
— the number of times called
(Ex. 3 times) and
— the caller’s phone number.
If the display continuously shows
“12:00AM 1/1” or “0:00 1/1”,
the clock needs adjusting (p. 16).
During a conversation, the display
shows the length of the call.
(Ex. 1 hour, 6 minutes and 35
seconds.)
The dial lock mode is set. To
cancel the mode, see page 56.
When the restricted number (0 or
00) is dialled, it is displayed. To
cancel the mode, see page 57.
While the portable unit is engaged
in an outside call, it is displayed.
11:34AM 12/25
10 NEW CALLS
12:00AM 1/1
10 NEW CALLS
11:50AM 11/24
1-06-35
11:50AM 11/24
DIAL LOCKED
11:50AM 11/24
CALL RESTRICTED
11:34AM 12/25
LINE BUSY
While the portable unit user is
using the Caller List, it is displayed.
11:34AM 12/25
CALLER-ID BUSY
11:50AM 12/25
RINGER OFF
11:50AM 12/25
11:50AM 12/25
NO ITEM STORED
11:50AM 11/24NEW
#41 ✕3