35
Basic Operation
Enter name
CINDY TURNER
#=
←→
H
OK=Save
Storing Caller List Information in the Directory

Using the portable unit

You can store phone numbers that are in the Caller List into the directory.
Make sure that the base unit and portable unit are in the standby mode.
1
Press or OK on the portable unit to
enter the Caller List.
2
Press or repeatedly to find the caller
you want to store in the directory, and press
OK.
•If the number requires editing, see page 33.
3
While the arrow points to
“Save directory”, press OK
(Yes key).
■When the caller’s name is not displayed
in the Caller List:
a)If a name is not required, press OK
(Save key).
b)If a name is required, enter the name
(p. 42). When finished, press OK
(Save key).
•A beep sounds.
•To store other numbers, repeat steps 2 and
3.
•To return to the standby mode, press
(EXIT/CH).
•You can exit the programming mode any time by pressing (EXIT/CH).
•If the display shows “Memory is full” in step 3, the display will return
to step 2. Press (EXIT/CH) to exit the list.
To erase other stored items from the directory, see page 47.
•You cannot store caller information in the directory if a phone number is
not displayed.
10 new calls
G=New F=Old
0234567890
11:20A JAN12 ✕3
H
Save directory
Clear
GF
H
OK=Yes
Enter name
#=
←→
H
OK=Save