Before Requesting Help
75
Useful Information
Problem
The unit does not work.
“Out of range” is
displayed and an alarm
tone sounds.
“Not available” is
displayed and busy tones
sound when you press
(TALK).
“LINE BUSY” is displayed.
You cannot dial.
Remedy
•Check the settings (p. 10–18).
•Charge the battery fully (p. 12).
•Clean the charge contacts and charge
again (p. 13).
•Install the battery properly (p. 74).
•Place the portable unit on the charger
and unplug the AC adaptor of the base
unit to reset. Plug in, then try again.
•Re-install the battery within 3 minutes to
avoid memory loss and place the
portable unit on the charger. Then try
again.
•The portable unit number has been
cleared or has not been registered.
Register the portable unit (p. 66).
•This unit is not designed to be used with
rotary (pulse dialling) services.
•
The portable unit
is too far from the base
unit. Move closer and try again.
•Place the portable unit on the charger
and try again.
•Plug in the AC adaptor of the base unit.
•Extend the antennas fully.
•Another portable unit is in use.
•The base unit is in use.
•While the portable unit is engaged in an
outside call. Wait until the IN USE
indicator light goes out.
•The unit is in the dial lock mode. To
cancel, see page 56.
•The dialled number is restricted. To
cancel, see page 57.