77
Useful Information
Problem
While programming or
searching, the unit starts to
ring and stops the
program/search.
The display goes to the
standby mode while
viewing the Caller
List/directory list.
The unit does not display
the caller’s phone number.
(LOCATOR/INTERCOM)
does not function.
You cannot redial the last
number dialled.
Remedy
•To answer the call, lift the handset or
press (TALK) or (SP-PHONE).
Start again from the beginning after
hanging up.
•Do not pause for over 60 seconds while
searching.
•Other telephone equipment may be
interfering with your phone. Disconnect it
and try again.
•Other electrical appliances connected to
the same outlet may be interfering with
the Caller ID information.
•Telephone line noise may be affecting
the Caller ID information.
•Some PABX do not support Caller ID
services.
•The portable unit is too far from the base
unit.
•The portable unit is engaged in an
outside call. Wait until the IN USE
indicator light goes out.
•The portable unit number has been
cleared or has not been registered.
Register the portable unit number (p. 66).
•If the last number dialled was more than
32 digits long, the number will not be
redialled.
•(REDIAL/PAUSE) has a double function
as either redial or pause. It will redial the
last number dialled, if pressed at the
outset of a call (p. 21, 24).
If another number has been dialled first,
it will operate as a pause button (p. 62).