63
Advanced Operation
Make sure that the base unit and portable unit are in the standby mode.
•
You can exit the programming mode any time by pressing (EXIT/CH).
•
If 3 beeps sound and the display shows “Save error”, move closer to the
base unit and try again. If “Save error” is still displayed, place the portable
unit on the charger. Start again from step 1.
For Australia Users:
•
You can access Telstra’s “EASY CALL” service by having the recall time
set at 100 msec, and then follow Telstra’s “EASY CALL” instructions to
operate this service.
•
If you are connected via a PBX, a longer recall time may be necessary to
use PBX functions (transferring a call etc.). Consult your PBX installer for
the correct setting.
1
Press (FUNCTION/EDIT) on the portable unit.
2
Press or repeatedly until the arrow
points to “Program”.
3
Press OK (Yes key).
4
Press or repeatedly until the arrow
points to “Set recall time”.
5
Press OK (Yes key).
6
Press or repeatedly until the desired
time is displayed.
7
Press OK (Save key).
•A beep sounds.
•
To return to the standby mode, press (EXIT/CH).
H
Program
GF
H
OK=Yes
H
Set recall time
Unit option
GF
H
OK=Yes
Recall time
:100ms
GF
H
OK=Save
For New Zealand Users:
Adjust the recall time to 600 msec for use with Telecom’s Call Waiting
Service. Press (RECALL) if you hear a call-waiting tone while talking.
•
The first call is put on hold and you can answer the second call.
•
To return to the first caller, press (RECALL) again.
•
Your telephone company may not support the second caller display feature.
•
If you are connected via a PBX, a longer or shorter recall time may be
necessary to use PBX functions (transferring a call etc.). Consult your PBX
installer for the correct setting.