Setting all handsets to ring | Panasonic KX-TCD430NZ manual

Multi-unit Operation

Setting all or selected handsets to ring

You can select one of 3 methods to determine how the handsets ring for incoming calls.

−“1”: All handsets will ring.

−“2”: Selected handset(s) will ring.

−“3”: Selected handset(s) will ring, then all handsets will ring.

Setting all handsets to ring

1Press {j}.

2Press {v} repeatedly to display “SETTING BS”, then press {>}.

3Press {1}.

4Enter “0000” (default base unit PIN).

LIf you changed PIN, enter it (page 20).

5Press {1} to select “1”.

6Press {>}, then press {ih}.

Setting the selected handset(s) to ring

1Press {j}.

2Press {v} repeatedly to display “SETTING BS”, then press {>}.

3Press {1}.

4Enter “0000” (default base unit PIN).

LIf you changed PIN, enter it (page 20).

5Press {2} to select “2”.

LAll registered handset numbers will be displayed and the pre-selected handset number will flash.

6Press the desired handset number(s).

LThe selected handset number(s) will flash.

LTo cancel a selected handset number, press the number again. The number will stop flashing.

7Press {>}, then press {ih}.

Setting the selected handset(s) to ring before all handsets ring

1Press {j}.

2Press {v} repeatedly to display “SETTING BS”, then press {>}.

3Press {1}.

4Enter “0000” (default base unit PIN).

LIf you changed PIN, enter it (page 20).

5Press {3} to select “3”.

LAll registered handset numbers will be displayed and the pre-selected handset number will flash.

6Press the desired handset number(s).

LThe selected handset number(s) will flash.

LTo cancel a selected handset number, press the number again. The number will stop flashing.

7Press {>}.

8Press a dial key from {1} to {6} to select the number of rings before all handsets ring.

LThe selected number of rings will be shown on the right edge of the display.

9Press {>}, then press {ih}.

25

Image 25

Panasonic KX-TCD430NZ operating instructions Setting all handsets to ring, Setting the selected handsets to ring

Contents

Model No. KX-TCD430NZ Telephone Included accessories Accessory informationAdditional/replacement accessories Model No Description Important information Handset Location of controlsBase unit Receiver Display Phonebook Talk Navigator Battery charge Battery installationBattery strength Connections Turning the power on/off Battery replacement Wall mounting To edit a number in the redial list before calling it Other featuresTo erase numbers in the redial list To store a number from the redial list into the phonebook Handset locator Answering calls Erasing a stored entry Editing a stored entryKeys To edit/correct a mistake Making calls using a hot key Making calls using the phonebookHot key quick dial Assigning an entry in the phonebook to a hot key Using toll services from Telecom or another company Caller ID serviceCall minder Viewing caller information and calling back Erasing caller information Editing a caller’s phone number before calling backStoring caller information into the phonebook Example 2nd menu 3rd menu Default setting Guide to handset settings Time alarm Handset settingsRinger options Example Selecting the talk mode display Selecting the standby mode displayTone options Display options Call options Setting call barSelecting the display language Other options Base unit settings Guide to base unit settingsAdjusting ringer volume Setting flash time Setting call restriction Setting pause lengthCancelling a restricted number Turning on/off call restriction Storing emergency numbers Resetting the base unit to its default settingsChanging stored emergency numbers Registering a handset to a base unit Operating additional unitsAdditional handsets Additional base units Selecting a base unit Cancelling a handset Setting the selected handsets to ring Setting all handsets to ring To transfer a call directly without speaking to handset Handset Troubleshooting Fully charged the batteries, but 074 still flashes Handset beeps intermittently and/or 074 flashesCaller information is not displayed Cannot register a handset to a base unit Power consumption, Base unit Standby RF Transmission Power Approx mWTechnical information Number of channels 120 Duplex PIN IndexPage Customer Support Centre Tel. No 272 Sales Department For your future referenceManufacturer